BENNING THYROTRONIC tiristorinis lygintuvas

Features:

Controlled thyristor bridge: 6 pulses standard, 12 pulses optional

DSP technology, galvanic isolation, temperature compensated charging

Suitable for lead-acid, NiCd and lithium-ion batteries

Programmable fast, equalization and initial charging, battery circuit and capacity tests

Parallel operation with active or passive load balancing

Alarm and monitoring module; LCD or 10 inch touch screen

Ruggedized; MODBUS, IEC 61850 and other protocols

SPECIFICATIONS

Manufacturer
BENNING
Series
THYROTRONIC
Device type
Thyristor rectifier for stationary battery systems; controlled thyristor bridge, 6-pulse (standard) or 12-pulse (optional)
Input voltage (1 phase)
120, 220, 230 or 240 V ±10 % (others on request)
Input voltage (3 phases)
208, 380, 400, 415, 480, 600 or 690 V ±10 % (others on request)
Frequency
50 or 60 Hz ±10 %
Efficiency
up to 94 % (depending on type)
Nominal output voltages
24, 48, 60, 110 / 125 and 220 / 240 V
Current range
Three-phase with ventilation: 150–2000 A; three-phase convection: 50–500 A; single-phase: 25–100 A
Output voltage limits (min. / sustain / fast / smoothing)
24 V: 18 / 27.6 / 28.8 / 32.4 V; 48 V: 36 / 55.2 / 57.6 / 64.8 V; 60 V: 45 / 69 / 72 / 81 V; 110 / 125 V: 81 / 138 / 144 / 156 V; 220 / 240 V: 162 / 276 / 288 / 312 V
Battery technologies
Lead acid, NiCd, lithium ion (others on request)
Charging characteristic
IU according to DIN 41773
Static voltage regulation
±1 %
Pulsations
Without battery ≤ 5 % (optional ≤ 1 %); battery eliminator according to NEMA PE-5
Security class
IP20…IP52 (others on request)
Working temperature
–10…40 °C (power is reduced at higher temperatures)
Altitude above sea level
up to 1000 m without derating (max. 5000 m)
Color and cable entry
RAL 7035; cables from below (from above on request)
Noise
typically less than 65 dB(A)
Standards
Safety EN 62477-1; EMC EN 61000-6-2, -6-4, -6-5, EN 62040-2; power EN 60146-1-1, EN 62040-5-3