en
  • lt
  • en

Home > News > Automated chemical dosing system at Intersurgical factory

Automated chemical dosing system at Intersurgical factory

Automatizuota chemijos dozavimo sistema Intersurgical gamykloje

Invertas, UAB, in cooperation with an automation partner Arionex, UAB, implemented washing solution parameter measurement, control and chemical dosing system at the Intersurgical, UAB factory in Lithuania.

The goal of the project was to create an automated solution that would measure the concentration of a process washing solution in real time. pH, electrical conductivity and temperature, would allow control of the set parameter limits and manage the chemical dosing process.

The most important task was not only to measure and display process values. The system had to help ensure that technological equipment could only operate when the parameters of the prepared washing solution met the specified conditions.

                                                                  Control of washing solution parameters

 

To control the quality of the washing solution used in Intersurgical’s manufacturing process, three key parameters needed to be continuously monitored – pH, electrical conductivity and temperature.

The operator must be able to see the actual process values and be able to set their allowable limits. If at least one parameter goes outside the set range, the system can identify an inappropriate solution state and react accordingly.

In this way, measuring equipment becomes not only an indication tool, but also an important part of the entire technological process control.

JUMO AQUIS touch S – the basis of the system

 

The main measurement and control device selected for the project is JUMO AQUIS touch S – a modular multi-channel system for liquid analysis and process control tasks.

 

The JUMO AQUIS touch S combines different analytical measurement parameters on a single platform, visualizes them and uses them for process control. The device has a color touchscreen, where the operator can conveniently monitor current measurement values, process status, set limits and warnings.

An important advantage of the AQUIS touch S is its flexible system configuration. Depending on the process, different liquid analysis sensors and measurement channels can be integrated into the controller. This allows one device to be used as a central measurement and control platform, rather than installing several separate controllers for each parameter.

 

The Intersurgical project used JUMO AQUIS touch S 202581 configuration with JUMO digiLine/RS485 pH channel and inductive conductivity measurement input. The system combines pH, electrical conductivity and temperature measurements, and the information obtained is used to control the condition of the washing solution.

 

Grundfos chemical dosing system

 

Chemical dosing used in the project Grundfos DMX series dosing pump with a capacity of up to 115 l/h. The pumps of this series are designed for precise dosing of chemical reagents in industrial processes, making the solution well suited for the washing solution preparation system.

 

The dosing system was not only completed with the pump itself. It was equipped chemical suction line with level control, back pressure valve, 100 liter reagent tank, necessary piping, connections and electrical control components.

 

The Grundfos dosing system works as part of an overall technological solution - the reagent is dosed into the solution being prepared, and its actual condition is controlled JUMO pH, conductivity and temperature measurement system. In this way, chemical dosing and analytical measurements are combined into a single process, allowing the operator to monitor not only the amount of reagent added, but also the actual parameters of the prepared solution.

 

pH, temperature and conductivity measurement

 

Used for pH control JUMO pH electrode with integrated Pt1000 temperature sensor and JUMO digiLine pH/T electronics 202705. The chosen solution allows for continuous monitoring of the pH of the washing solution and at the same time obtaining temperature information necessary to assess the state of the process.

 

JUMO digiLine The technology allows the sensor signal to be digitized at the measurement location and the measurement information to be transmitted digitally to the JUMO AQUIS touch S. This architecture allows for convenient integration of analytical sensors into a common measurement and control system and centralized monitoring of process parameters.

 

Selected for measuring electrical conductivity JUMO 202942 inductive conductivity and temperature sensor. The inductive measuring principle is particularly suitable for the control of technological and chemical solutions, as the measurement is performed without direct contact of the electrodes with the measured medium. This reduces the influence of contamination and electrode wear and ensures reliable measurement during long-term operation.

 

In this process pH and electrical conductivity are two important indicators of the condition of the washing solution. pH measurement allows you to control the acidity or alkalinity of a solution, while conductivity measurement provides additional information about changes in the concentration and composition of the solution. Temperature measurement, in turn, allows you to monitor the conditions under which the process takes place and assess its influence on other measured parameters.

 

All measurement data is transmitted to JUMO AQUIS touch S, so the operator can see the current pH, conductivity and temperature values on one screen. By setting the permissible process limits, the system allows you to quickly identify a situation when the washing solution no longer meets the established technological conditions.

 

Thus, one common washing solution quality control system, in which several independent measurement parameters are used to assess the real state of the process and for further control of technological equipment.

Invertas and Arionex – from equipment selection to a functioning system

 

The project was implemented in collaboration between Invertas and Arionex specialists.

 

Invertas performed a technological task analysis in the project, Selection and supply of JUMO measurement and control equipmentand together with partners formed a common technical solution.

Arionex's expertise was used for the dosing system part, electrical wiring, programming, installation and commissioning works.

One of the most important stages of the project was the coordination of different system components – Integration of JUMO analytical measuring equipment, Grundfos dosing systems and Intersurgical process equipment into one working solution.

 

Close cooperation between Invertas and Arionex allowed the client to offer not a set of individual components, but a fully equipped system adapted to a specific technological process. From the initial task and selection of suitable equipment to programming, installation and final commissioning, the entire solution was shaped taking into account the real conditions and needs of Intersurgical's production process.

                                                                           Result of the implemented project

 

The system installed at Intersurgical's factory allows for one-stop monitor the pH, electrical conductivity and temperature of the washing solution, control the set process limits and manage chemical dosing.

 

The operator is provided with clear information about the process status, and measurement data can be used to decide whether the prepared solution meets the specified technological conditions.

This project demonstrates Invertas' expertise beyond supplying individual industrial measuring instruments. Together with reliable automation partners, we can offer a complete process measurement and automation solution - from task analysis, selection of appropriate technology and equipment to programming, integration and system launch at the production facility.

Invertas, UAB supplies and selects pH, electrical conductivity, temperature, pressure, flow, level and other technological parameter measurement and process automation solutions for industry.

If you would like more information about our solutions, click the button below.