Fuji Electric cirkonio deguonies zondas su EX sertifikatu – ZFKE

SPECIFICATIONS

• Measured gas temperature

  -10 to +600ºC

• Measured gas pressure

  -3 to +3 kPa (-306 to +306 mm H2O)

• Operating temperature

  -10 to +60ºC for primary sensing element
  125ºC or less at sensor flange surface when power is applied

• Storage temperature

  -20 to +70ºC

• Construction

  Dust and rainproof structure (IEC IP66 equivalent)

• Filter

  SUS316 (60 μm filter accuracy)

• Main materials of parts in contact with gas

  Detector; Zirconia, SUS316, platinum
  Flux guide tube; SUS316

• Calibration gas inlet

  ø6 mm tube fitting or ø1/4 inch tube fitting (according to datasheet)

• Calibration gas flow

  1,5–2 l/min

• Detector mounting

  Horizontal plane ±45º, ambient air must be clean

• Ejector air inlet flow rate

  5–10 l/min

• Purge air inlet pressure

  200–300 kPa (2–3 kgf/cm²)

• Finish color

  Case: silver and SUS metallic color
  Cover: blue

• Exterior dimensions

  (L × max. dia.) 215 mm × 164 mm (detector)

• Approximate weight

  Detector; 3.0 kg
  Flow guide tube (for corrosive gases, 1 m); 6 kg

AVAILABLE MODELS

DOCUMENTS

• Manual: Zirconia oxygen sensor for EX zone ZFKE

  822.36 KB

  Download

• Datasheet ZKME controller and ZFKE zirconia oxygen sensor for EX zones

  1.4 MB

  Download

• Questionnaire: Application for O₂ zirconia analyser

  277.16 KB

  Download

• Brochure: Measures for energy and the environment

  4.01 MB

  Download