BENNING INVERTRONIC compact SE – modular inverter system (1 / 3 phase)
DC power supply, DC/AC inverters
Fields of application
High-reliability single-phase, three-phase and split-phase AC power supply for critical industrial loads; together with TEBECHOP SE rectifiers, flexible, expandable and cost-effective battery-backed backup power systems.
Features:
Modules 2.5 kVA, up to 30 in parallel (up to 75 kW in the system)
Decentralized architecture with no single point of failure, each module with controller and static bypass
Hot swap, module replacement in less than 10 minutes.
Configurable for single-phase, three-phase or split-phase loads; n+1 or n+r redundancy
Efficiency up to 94 %, economical even at partial load
Monitoring via MCU 3000: Ethernet, SNMP, Modbus, Profibus, IEC 61850
SPECIFICATIONS
AVAILABLE MODELS
DOCUMENTS
SPECIFICATIONS
Manufacturer
BENNING
Series
INVERTRONIC compact SE
Device type
Modular decentralized inverter system (single-phase, three-phase, split-phase); together with TEBECHOP SE rectifiers, it forms a battery-backed backup power system
Single phase 220 / 230 / 240 V or 110 / 120 / 130 V; three phase 380 / 400 / 415 V or 208 V; split phase 120 / 240 V; 50 / 60 Hz
Module power
1,200 VA/W (24 V DC) or 2,500 VA/W (48 V DC and higher)
System power
Up to 75 kW in one system (30 modules); up to 150 kW when two systems are connected in parallel
Modules in the holder
3 (19 inch bracket)
Reservation
n+1 or n+r; no single point of failure – each module contains a controller (DSP), inverter and static bypass
Service
Hot swappable; module can be replaced in less than 10 minutes.
Output quality
Voltage tolerance ±1 %; frequency deviation ±0.1 %; distortion up to 2 %; amplitude factor up to 3.0
Utility
Up to 94 %
Cooling
Fan
Security class
IP20 (other on request)
Environment
From –20 to +40 °C (if exceeded, power is reduced to 65 °C); humidity 5–95 % without condensation; altitude up to 1000 m without power reduction; noise less than 55 dB(A)
Standards
EN 62477-1, UL 60950; EMC EN 55032 Class B or EN 62040-2 (C2 / C3)
Monitoring
MCU 3000 (LED display and control panel in the cabinet door); modem, Ethernet, web (HTML), SNMP, Modbus, Profibus, IEC 61850
Manual bypass
A simple on/off or make-before-break switch (AUTO/TEST/BYPASS) can be integrated into the cabinet
