Fuji Electric gauge pressure sensor – TR

SPECIFICATIONS

• Sensitive element

  Thick ceramic layer

• Measurement range

  -1 to 400 bar

• Reinforced maximum pressure

  1.5 to 750 bar

• Output signal

  4-20 mA, 2 wires

• Power supply

  12 to 28 Vdc

• Fallback value

  ≈ 3.7 mA or ≈ 25 to 27 mA (in the event of electrical failure of the cell)

• Zero + slope adjustment

  ± 3% (optional rangeability from 50 to 100% of measurement range)

• Load

  R(Ω)=(Ualim-10V)/0,02A

• Maximum overall error

  ≤ 0.2% EM (at 25°C)/
  ≤ 0.4% EM (at 25 °C)
  Linearity + Hysteresis + Repeatability

• Temperature drift

  ± 0.03%/°C over measurement range
  (T° compensation between 0 and 50°C)

• Ambient temperature

  -20 to +70 °C

• Temperature and humidity of fluid

  -20 to +70 °C

• Storage temperature

  -40 to +80 °C

• Protection

  IP 65 (connector outlet)
  IP 67 (cable outlet)

• Process connections

  Stainless steel 316 L
  ½″ GM, ¼″ GM, ½″ NPTM

• Electrical connections

  Connector ISO4400 / DIN43650
  Cable outlet 2 m
  M12 connection (4 pins)

• Housing

  Stainless steel 316 L

• Part in contact with the fluid

  316 L stainless steel + ceramic + FKM seal
  (others: see datasheet)

• Certifications and compliance

  ATEX version (optional) : Intrinsic safety
  Ex ia IIC T6 Ga (Ambient temperature between -30°C and +55°C)
  Ex ia IIC T5 Ga (Ambient temperature between -30°C and +0°C)
  Ex ia IIIC T80°C Da (Ambient temperature between -30°C and +55°C)
  Ex ia IIIC T95°C Da (Ambient temperature between -30°C and +70°C)
  Group - Category II - 1GD and I M1

AVAILABLE MODELS

DOCUMENTS

• Instrukcija: Slėgio keitikliai GR GA ir TR TA

  287.39 KB

  Download

• Techninė specifikacija: Slėgio keitikliai TR TA 22

  1.19 MB

  Download

• Techninė specifikacija: Slėgio keitikliai TR TA 01

  1013.49 KB

  Download

• Techninė specifikacija: Slėgio keitikliai TR TA 02

  1.01 MB

  Download