Home > Products > Flowmeters > Fuji Electric compact ultrasonic flowmeter S-Flow – FSZ
Fuji Electric compact ultrasonic flowmeter S-Flow – FSZ
Flowmeters
Fields of application
This flowmeter can be installed on cold and hot water pipes throughout the building (pure water manufacturing processes, equipment cleaning and cooling processes).
The flowmeter can also be mounted inside equipment where there is a dense network of small-diameter pipes (semiconductor manufacturing equipment).
-15 to +85°C (may vary depending on ambient temperature)
Analog output signal
4 to 20 mA DC : 1 point
Load resistance: 550 Ω max
Digital output
Outputs can be assigned to total normal and alarms as required
Transistor contact (open collector)
- Outputs: 2
- Normal: ON/OFF selection
- Contact rating: 27.5 V DC, 100 mA
- Output frequency: Max. 100 P/s (Pulse width 5, 10, 50, 100, 200 ms)
Connectivity
RS-485 (MODBUS)
Number of connectable modules: up to 31
Baud rates: 9600, 19200, 38400 bps
Parity: None/odd/even, selectable
Stop bit: 1 or 2 bits, selectable
Cable length: up to 1 km
Data: throughput, pipe temperature, forward total, error information, etc.
Display
4-digit 2-line LED display
Security class
IP65/IP67
Ambient temperature
-15 to +60°C
Ambient humidity
95% HR or less
Power supply/consumption
20 to 27.5 V DC, 2.5 W or less
Weight
FSZ08: 400g FSZ15: 500g FSZ25: 600g
AVAILABLE MODELS
DOCUMENTS
Manual: Compact ultrasonic flow meter S-flow converter FSZ cable FLYF